Does your laptop experience slowness and feel heavier when having multiple tabs open? Improving RAM could be a simpler solution than you imagine. RAM, or random access memory, plays an essential role in your computer's performance. When you run out of physical memory, the computer starts swapping data on the hard drive, causing all processes to drastically slow down. In the following guide, we provide you with details on how to increase your laptop's RAM and, best of all, how to do this process yourself.

Installing RAM on your new laptop:

If you carefully follow the instructions, you can install the new RAM yourself without requiring advanced technical knowledge. Before you begin, see the end of this article for information on how to check your RAM usage, determine if your laptop is upgradeable, and select the correct type of RAM.

It is important to note that laptop interiors vary in design. The following steps are general tips that should apply to most laptops, although details may vary.

1. Turn off your laptop and make sure it is disconnected from any power source.
2. Turn your laptop over to identify and unscrew the screws that will allow you to remove the motherboard.
3. SODIMM memory cards are usually held in place by clips. Identify them and remember to hold the RAM by the edges instead of covering the gold connectors.
4. Remove the old RAM from your laptop by releasing the clips that hold it in place.
5. Insert the new RAM holding it by the sides at an angle; the pins should be aligned with those in the slot.
6. Firmly press the new RAM until it snaps into place under the clips.
7. Replace the motherboard and screw it back on.
8. Turn on your laptop and go to Settings > System > About. Here you should see the total amount of RAM installed. If it is incorrect, repeat the steps above to reset the RAM.

Check your current RAM usage:

The instructions above are basic, but there is more you should know before purchasing new RAM units. Start by checking your laptop's memory usage. With your most demanding workload open and running, open Windows Task Manager to see if you need more. Here we explain how to open it:

- Right click on the taskbar.
- Select Task Manager.
- Click on the Performance tab.

Here you can see how much memory is being used compared to the total amount of RAM available. If you are close to the limit, the update could significantly improve performance.

Determine if you can (or cannot) upgrade your RAM:

You will need to know if it is possible to upgrade your laptop's RAM. Not all laptops allow these updates; some have sealed backs or soldered memory. If you have a recent MacBook or other compact laptop, you probably won't be able to do the upgrade yourself.

You can use tools like Crucial's Memory Advisor or consult your laptop's documentation to determine if an update is possible. Identify the type and speed of RAM your laptop supports (DDR2, DDR3, DDR4 or DDR5) and the maximum capacity. If you can access its memory, you'll be in good shape.

Buy RAM compatible with your laptop:

Now that you know the type and speed of RAM your laptop can support, it's time to purchase RAM. Although it is not necessary to purchase a pair of corresponding memory cards, dual-channel RAM offers superior performance and eliminates potential compatibility conflicts.

You can buy RAM to upgrade your laptop from our website www.Computerhouse.pe through physical stores or official social networks.